[Empeg-forsale] Re: I WANT THE CLEAR BLUE BUTTONS

mtempsch@empegbbs-noreply.merlins.org mtempsch at empegbbs-noreply.merlins.org
Thu, 11 Apr 2002 19:12:00 GMT


The current through each LED should still be same, so current through single resistor is 4x current through each resistor in the pack. Voltage drop should be same -< R_single should be R/4 (a quarter of the value of the resistors in the pack)

Unless I missed something obvious...

This setup is more sensitive to differences in V_forward among the 4 LEDs though.

/Michael